Suche

Freitag, 29. Juli 2011

Neues von der K1 von "Modern Combat"

Hello everyone, here are the following details and modifications to the marker:

ROF: Standard factory setting will 22 bps. Maximum ROF will be 32 bps.

Mag: There will be 2 versions available on the market, one with the Air Feed System with a capacity of 43 rounds, the second will be a spring version with 39 rounds capacity.
I have tested with heavier rounds such as pepperballs and M68BP ( breaking glass rounds ) and opted for a spring version of the mag to adapt to these rounds for law& military agencies.

The K1 is equiped with ball detents and eye beam anti chop system.

Selecting fire have only these 3 modes: Semi. burst, full auto.... Can be upgrade it to 12 modes.

There are four motherboards inside K1, each manage certain functions and reduce cost of replacing parts and isolating malfunctions issues.

1. On/Off button.
2. Power distribution, eye, solenoid, selector switch.
3. Selector switch ( bridged with second board )
4. Mag.

Velocity: Factory setting is 275 fps, it can be lowered down to 260 fps. Anything lower than that the bolt will not react. higher velocity can be set high up to 450 fps for military and law enforcement use.
K1 excels in HP output but works fine with LP tanks. Not recommended for Co2 for obvious reasons....

Power: There 2 blocks of batteries now, each blocks have 6 batteries AA. One is just for the mag electrical motor, and the other for the other functions. Both blocks can be recharged with rechargeable batteries or can be disconnected and be replaced by 2 standard or rechargeable  9 volt batteries.

Weight: K1 now weights 2.99 kg with batterries and empty mag included.... We have trimmed down most of the excess fat from the barrel and upper receiver body.

Integrated 8ci tank: There will be no integrated tank inside of k1 for now.... This is due a license issue since our HP connection is similar to NASA design. The full tank is clipped  to the connecting hose thru a head pin instead of a standard regulator. The tank cannot be removed under pressure, once emptied, we just push the tank and it will come off the connecting hose. Also carbon fiber tank hasn't come out yet which is another reason....

Modern Combat "K1"

Keine Kommentare:

Kommentar veröffentlichen